Africa Drill Mart

Leading supplier of drilling products, seeking to bridge the gap between B2B and B2C spectrums of the drilling and geotechnical ground abstraction industries

Wilo-Stratos MAXO-D

KSh 100,000.00

  • Intuitive operation by application-guided settings with the Setup Guide plus the combination of a new display and operating button using the Green Button Technology
  • Maximum energy efficiency thanks to the combination of optimized and innovative energy-saving functions (e.g. No-Flow Stop)
  • Optimum system efficiency thanks to new and innovative intelligent control functions, such as Dynamic Adapt plus, Multi-Flow Adaptation, and T-const. and ΔT-const.
  • Latest communication interfaces (e.g. Bluetooth) for connecting to mobile terminal devices and direct pump networking using Wilo Net for multiple pump control
  • Maximum convenience in electrical installation thanks to a clearly arranged and spacious terminal room and the optimized Wilo-Connector

Design

Smart glandless twin-head circulator with screwed connection or flange connection, EC motor with integrated electronic power adjustment.

Application

Hot-water heating systems of all kinds, air-conditioning systems, closed cooling circuits, and industrial circulation systems.

Equipment/function

Field of application

The pump facilitates an operation with the highest system efficiency via the precise setting of the control mode for the system-specific application (e.g. radiator, underfloor heating, ceiling cooling).

Heating

  • Radiator
  • Underfloor heating
  • Ceiling heating
  • Fan heater
  • Concrete core heating*
  • Hydraulic shunt
  • Differential pressure-less distributor*
  • Buffer heating*
  • Heat exchanger
  • Heat source circuit (heat pump)*
  • District heating circuit*

Cooling

  • Ceiling cooling
  • Underfloor cooling
  • Air-conditioning devices
  • Concrete core cooling*
  • Hydraulic shunt
  • Differential pressure-less distributor*
  • Buffer cooling*
  • Heat exchanger
  • Recooling circuit*
  • District cooling circuit*

(* system types from SW≥01.05.10.00 available)

Heating and cooling combined

  • Automatic switchover (version “-R7”: not possible; however, possible with Stratos MAXO temperature sensor)

The following control modes are available depending on the selected application:

Control modes

  • Constant speed (control mode)
  • Δp-c for constant differential pressure
  • Δp-v for variable differential pressure
  • Dynamic Adapt plus for continuous (dynamic) adjustment of the delivery rate to the current requirement
  • T-const. for constant temperature control
  • ΔT-const. for constant differential temperature control
  • Constant Q for constant volume flow control
  • Multi-Flow Adaptation: Total volume flow determination through the feeder pump for the needs-based supply of secondary pumps in the heating circuit distributors
  • User-defined PID control

Optional functions

  • Q-limitmax. for limiting the maximum volume flow
  • Q-limitmin. for limiting the minimum volume flow
  • No-Flow Stop (zero-flow-deactivation)
  • Automatic night setback (version “-R7”: not possible; however, possible with Stratos MAXO temperature sensor)
  • Index circuit evaluator (Δp-c control with external actual value sensor)
  • Thermal disinfection detection (Stratos MAXO-Z)
  • Variable pitch of Δp-v pump curve

Manual settings

  • Selection of the field of application in the setting assistant
  • Setting the related operating parameters
  • Nominal duty point: direct input of calculated duty point at Δp-v
  • Status display
  • Setting and resetting the energy meters (heating and cooling)
  • Pump venting function
  • Key lock for disabling the settings
  • Function for resetting the factory settings or the saved restoration points (parameter sets)
  • Parameterizing the analog inputs
  • Parameterizing the binary inputs
  • Parameterizing the relay outputs
  • Twin-head pump function (for 2 single pumps, which should be operated as a twin-head pump)

Automatic functions

  • Power adjustment according to requirements for energy-efficient operation depending on the operating mode
  • Detection of night setback (version “-R7”: not possible; however, possible with Stratos MAXO temperature sensor)
  • Deactivation at zero flow (No-Flow Stop)
  • Soft start
  • Automatic troubleshooting routines (e.g. deblocking function)
  • Switchover between heating/cooling mode (version “-R7”: automatic switchover not possible; however, possible with Stratos MAXO temperature sensor)
  • Full motor protection with integrated trip electronics

External control inputs and their functions

2 x analog inputs:

  • Signal types: 0 – 10 V, 2 – 10 V, 0 – 20 mA, 4 – 20 mA, PT1000
  • Applications: Remote adjustment of the setpoints in every control mode (except Multi-Flow Adaptation), sensor inputs for temperature, differential pressure, or free sensor in user-defined PID operation

2 x digital inputs:

  • For potential-free control outputs or switch
  • Parameterizable functions:
    • Ext. Off
    • Ext. Min
    • Ext. Max
    • MANUAL (BMS-OFF)
    • Key lock
    • Switchover between heating/cooling mode

Wilo Net for dual pump management of 2 single pumps, communication of several pumps with each other, and pump-remote adjustment via the gateway

Signal and display functions

  • Display status operation display:
    • Setpoint
    • Actual delivery head
    • Actual volume flow
    • Power consumption
    • Electric consumption
    • Temperatures (version “-R7”: current fluid temperature possible with Stratos MAXO temperature sensor)
  • Status display LED: Faultless operation (green LED), pump communication (blue LED)
  • Display status of display fault (display red):
    • Error codes and error description in full text
    • Remedial measures
  • Display status of display warning (display yellow):
    • Warning codes and description of the warning in full text
    • Remedial measures
  • Display status process indicator (display blue):
    • Pump venting
    • Update procedure
  • Display BMS communication (display blue):
    • Summary of the active BMS parameters (baud rate, address…)
  • Collective fault signal SSM (potential-free changeover contact)
  • Collective run signal SBM (potential-free normally open contact)

Data exchange

  • Bluetooth interface for wireless data exchange and remote operation of the pump using a smartphone or tablet.
  • Remote monitoring of the pump via the Internet with the Wilo-Smart Gateway.
  • Digital Modbus TCP interface for connection to building automation (BA) (possible with Wilo-CIF module Ethernet [multi-protocol]).
  • Serial digital interface Modbus RTU for connecting building automation (BA) via RS485 bus system (possible with Wilo-CIF module Modbus RTU).
  • Digital BACnet IP interfaces for connection to building automation (BA) (possible with Wilo-CIF module Ethernet).
  • Serial digital interface BACnet MS/TP for connecting building automation (BA) via RS485 bus system (possible with Wilo-CIF module BACnet MS/TP).
  • Serial digital interface LON for connecting building automation (BA) via bus system LONWorks (possible with Wilo-CIF module LON).
  • Serial digital interface CANopen for connecting building automation (BA) via bus system CANopen (possible with Wilo-CIF module CANopen).
  • Serial digital interface PLR for connecting BA via company-specific coupling module (possible with Wilo-CIF module PLR).

Dual pump management (twin-head pump or 2 x single pumps)

  • Main/standby operation (automatic fault-actuated switchover/time-sensitive pump alteration)
  • Parallel operation (efficiency-optimized peak load cut-in and out)

Equipment

  • For flange-end pumps: Flange versions
    • Standard version for DN 32 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges
    • Standard version for DN 80/DN 100 pumps: PN 6 flange (designed for PN 16 according to EN 1092-2) for PN 6 counter flange
    • Special version for DN 32 to DN 100 pumps: PN 16 flange (according to EN 1092-2) for PN 16 counter flange
  • Various integrated communication interfaces and optionally usable CIF module plug-in position
  • 5 cable inlets for connecting the communication interfaces
  • Bluetooth interface
  • High-resolution graphic display with a green button and 2 additional buttons
  • User-friendly terminal room
  • Integrated temperature sensor (version “-R7”: without)
  • Quick electrical connection with optimized Wilo-Connector for the power supply